Holland's Gunsmithing takes tremendous pride in providing the gunsmith, shooter and reloader with only the BEST in precison tools and equipment! We will continue to innovate and come up with more items guaranteed to make your life and your reloading chores more consistent and enjoyable in the future!

    We thought long and hard before we sat down and made this gauge and we honestly think that it's the best in the industry! Our gauge does two jobs in one: it will check the runout of fired cases, sized cases and loaded rounds and it will also check for neck thickness and uniformity, as well. The tool is very simple to use and you don't need "three hands" to do the tasks, either! It is the most "user-friendly" gauge on the market! Machined from 7075 T-6 aluminum, it sports an anodized surface that will give long life and remain attractive even after the hard, repeated use it is sure to get. This tool will transform you from being a basic reloader to a person who does quality, consistent ammunition reloading!

    One of the most important tools at the shooter's workbench, a good set of dial calipers allows the measurement of such critical values as case OAL, loaded round length, neck diameters and much more. We carry Brown & Sharp and Mitutoyo and these are the smoothest, most accurate calipers that you can buy! Our 6" model covers all the measurements you're likely to ever need.

    This high quality American-made tool belongs in every shooter's box! It's a proven fact that proper torque has a direct effect on the accuracy of a firearm and providing uniform torque to receiver screws is absolutely essential to insuring an unstressed action that performs consistently. For example, a properly pillared system will require 45 - 50 in / lbs. for proper bedding. Always torque the front and rear screws the same and leave the center screw at 10 - 15 in / lbs. on 3-screw systems. The torque range of this wrench is 40 - 200 in / lbs. and it comes in a fitted plastic case for protection.

    Another Holland original, built to our specs. This tube mic will outshine the competition costing twice as much! Our soft touch ratchet system allows repeatable measuring to .0001". Get accurate dimensions on your turned necks, or use it check neck uniformity. Uniform case necks make for more accurate handloads. A "must have" for the serious handloader! Measures .17 cal. through .50 BMG.